- Collective housing
- Commercial
- Bureau
Univers® shading system
Product benefits
A robust and modular system, easy to install
The system of horizontal fixed slat sunshades enhances the curtain wall offering by providing an efficient solution for solar management and architectural aesthetics.
The range is available in five slat designs (three aerofoil shaped profiles and two rectangular profiles) offering tilt possibilities between +45° and -45°, allowing for fine optimization of sunlight and thermal contributions.
Sized to withstand severe climatic stresses, the solution has been validated by wind load tests up to 300 km/h, guaranteeing a high level of stability and durability in curtain walls.
Designed with a logic of set up rationalization, it integrates a direct fixing principle at the edge of the curtain wall, without the need for an additional mullion, thus facilitating integration and reducing installation interfaces.
Installux supports each client in the sizing of the works through the establishment of calculation charts and the development of custom solutions adapted to the specific constraints of each project.
Finally, all profiles are made of recycled aluminium to ensure a sustainable and responsible construction approach.
Ease of installation
- Fixed directly to the curtain wall edge without additional mullions
- Multiple angle options possible with the same fixing system
- Accessible, standardised fixings (no special tools required)
- Suitable for both new-build and refurbishment: installation onto existing curtain walls without removing glazing
Robust design
- Proven system tested in an accredited laboratory
- Wind resistance tested up to 300 km/h depending on configuration | Supports up to 300 kg per fixing point
- Qualicoat / Qualimarine certified surface treatment, suitable for demanding environments
- Assembly components in stainless steel or aluminium – corrosion-free and maintenance-free
Architectural freedom
- Several blade designs available with bespoke options
- Refined, consistent aesthetics: sleek aluminium profiles, flush-fitted end caps, discreet fixings, visual consistency with aluminium joinery
- Clips and blades can be powder-coated in the colour of your choice (+400 shades)
- Custom-made solutions for specific projects
Technical support
- Technical assistance before and during installation (design support, sizing guidance, etc.)
- Installation training available in workshop or on site
- Expertise in complex projects with a dedicated team
- In-house extrusion and powder coating within the Group
Environmental commitment
- 100% of profiles in recycled aluminium
- Alu+ C- label
Configurations
Technical focus
5 blade options
- Aerofoil blades: 150, 200 and 300 mm
- Rectangular blades: 200 and 300 mm
- Custom-made solutions on request
- Choice of over 400 colours
Ease of installation
- Fixed directly to the curtain wall transom face without additional mullions
- Accessible, standardised fixings (no special tools required)
- Suitable for both new-build and refurbishment: installation onto existing curtain walls without removing glazing
Multiple angle options available
- For aerofoil blade clips, the tilt ranges from +30° to -45°
- For rectangular blade clips, the tilt ranges from +45° to -45°
Discreet, robust system with no add-on profiles
- Fixing to the curtain wall transom face via a spacer
- Excellent resistance to a 300 kg cyclic load over 30,000 cycles
- Pull-out resistance up to 1000 kg under both positive and negative pressure
- Easy-to-install system
- Clips can be powder-coated to match the capping colour
Test report
Options
| Blade inclination | 45 |
|---|---|
| Blades motorisation | No |
Downloadable documents
Realizations
Software
Design office?
Join the Installux partner network
