Commercial

Univers® 60 curtain wall

With its Univers® 60 concept, INSTALLUX continues to develop technical and conceptual expertise to construct all types of facades over many years. The Univers® 60 range offers the following advantages: Seismic resistance tested by CEBTP, ideal for high-risk areas Capability to create glazing up to ... See more

Qualimarine

Qualicoat

Qualanod

Are you an individual? Click here

Product benefits

A curtain wall with seismic resistance for large-scale projects!

With its Univers^® 60 concept, INSTALLUX continues to develop technical and conceptual expertise to construct all types of facades over many years.

The Univers^® 60 range offers the following advantages:

Seismic resistance tested by CEBTP, ideal for high-risk areas
Capability to create glazing up to 7 meters in semi-perimeter
The curtain wall system allows glazing up to 46 mm thick
Significant increase in precision and speed during machining thanks to a new tool with mobile and pneumatic stops
Impact block with integrated sealing
Completion of all types of projects with adequate draining thanks to the two assembly modes:
- Pressure plate: option to use an additional block to avoid machining on the transom. Draining is done in cascade along the mullions thanks to specific transoms.
- Structural glazing: draining is carried out through the cover profiles.
Univers^® 60 offers the choice between two installation techniques: advancing or facing, depending on the project configuration.

Finally, it's possible to integrate an Italian-style SSG and parallel SSG opener. Initial type tests have been carried out with the Italian and parallel opener to achieve CE marking for the complete curtain wall. INSTALLUX thus ensures the full compliance of its facades with community requirements and current standards.

Implementation of XL Glazing

Up to 12m² of surface (7m half-perimeter)
Supports a load up to 750 kg per transom
Possibility to integrate shadow pods (mask technical parts)

Seismic resistance tested by CEBTP

Parallelogramming: maximum phase reached (phase 6)
Excitation test: maximum phase reached (phase 8)

System ease

Pressure plate: percutant block with integrated sealing
Structural glazing: mounted block to avoid shoulder (option)

Optimisation of productivity

Tool with 8 adjustable and pneumatic stops (precision gain)

Configurations

Grid

Vertical frame

Horizontal frame

Technical characteristics

Maximum wind inertia	2542,73 cm4
Side viewing mass	60 mm
Min. infill thickness	6 mm
Max. infill thickness	46 mm
Max. glazing/filling weight	750 kg
Drainage levels	Impact mode: draining through the fasteners and the cover profiles Penetrating mode: cascading draining along the uprights

Performances

Acoustic configuration

88.2 glazing Acoustic/16/66.2

Acoustic insulation Rw (C; Ctr)

40 (-1; -3) dB(A)

Thermal configuration

Triple glazing on frame

Thermal insulation Ucw

1,2 W/(m²·K)

AEV configuration (Air Water Wind)

Curtain wall Grid and Frame

Curtain wall air tightness

AE 1050

Curtain wall watertightness

RE1200

Curtain wall wind resistance/deformation

V1200
Load capacity: 1200 Pa
Safety pressure: 1800 Pa

Shock resistance

I5/E5

Balustrade

Yes

Technical focus

Grid and horizontal and vertical frameworks

Allows for patterns up to 7 m of half perimeter
Accepts infills from 6 to 46 mm
Supports a load up to 750 kg/rail
Two assembly modes: pressure plate or structural glazing

Grid

Allows for frames up to 7 m of half perimeter
Accepts infill from 6 to 46 mm
Supports a load up to 750 kg/crossbar
Two assembly modes: pressure plate or structural glazing

Horizontal frame

Enables the creation of frames up to 7 m of half perimeter
Accepts infills from 6 to 46 mm
Supports a load up to 750 kg/span
Two assembly modes: pressure plate or structural glazing

Shadow pod

This solution allows enhanced aesthetics of the full parts of the facades :

More design possibilities
Improved aesthetics of the full parts : allows concealment of technical parts
Integrated ventilation to limit overheating

Italian-style opening

Glazing from 18 to 44 mm
Thermal performance: Uf 1.6
Maximum height: 1750 mm
Squared opening profiles in continuity with the frame
Installation facilitated by the frame stop
Powder-coating possible for handles

Parallel opener

Glazing from 18 to 44 mm
Thermal performance: Uf 1.6
Maximum height: 1750 mm
Square sash profiles continuous with the frame
Easy installation with the frame stop
Powder-coating of handles possible

Cover profiles and ES on demand

INSTALLUX offers you the creation of custom spines and cover profiles to meet the technical or design constraints of your projects. This collaboration can be completed quickly thanks to the integration of our extrusion and powder-coating entities within the INSTALLUX GROUP.