Maintaining your aluminium joinery is easy and long-lasting

Contrary to wood or PVC, aluminum is unaffected by humidity, UV rays or temperature variations. It will not rust, will not warp, and its longevity is excellent, even in demanding environments (seaside, mountains, industrial zones...).

Thanks to high-quality thermolacquering (a surface coloring and protection process), aluminum profiles retain their color, texture and finish for years, without fading or blistering.

Result: no need to repaint, varnish or treat your aluminum joinery. A gentle cleaning is all it takes to restore their radiance.

Recommended frequency:

Cleaning twice a year is sufficient for most situations. In dense urban areas or by the sea, you can increase to three or four times a year to avoid the accumulation of dust, salt or pollution.

The right steps:

• Use clear or slightly soapy water (such as mild soap or diluted dishwashing liquid).
• Apply with a sponge or non-abrasive cloth.
• Rinse with clear water.
• Wipe with a soft cloth or chamois.

Absolutely avoid:

• Acidic, alkaline or solvent-based products (acetone, ammonia, bleach...).
• Abrasive sponges or scrapers that could scratch the surface.
• High-pressure cleaning too close together, which could damage the seals.

By adopting these simple gestures, you'll keep your aluminum windows, doors or bay windows looking like new for a long time to come. We recommend that you always call in a professional.

Beyond cleaning, remember to regularly check a few items to ensure the good operation of your openings:

Moving parts and accessories

• Check the condition of handles, hinges, hungs or pans.
• If necessary, lubricate metal parts with a suitable silicone-type product, avoiding any excess.

The seals

• Inspect seals for wear.
• Clean them with a damp cloth. A clean seal retains its elasticity and performance.

Drain holes

• Check that they are not blocked by leaves, dust or insects.
• A simple blow or clean with water is enough to ensure good drainage.

Good to know: The following work should only be carried out by a professional:

• Replacing hardware parts
• Unhooking or hanging the sash
• Adjusting parts, particularly the corner bearing, corner plug and compasses.

These little touches, performed once or twice a year, ensure smooth operation, extend the life of your joinery and avoid costly repairs.