Profiles for the construction of façades include a wide choice of mullions and transoms.
The transoms are fixed to the mullions directly by screws, or by transom connector blocks without any machining. The system provides the choice between frontal and progressive installation/semi-unitized.
Transom connector block fixed transoms are drained through holes in pressure plates and cappings, whereas the direct screw-fixed transoms are drained through the mullions (cascade drainage).
The variety and range of its aesthetic variations allow the system to suit any architectural requirement, the dimensions of modules, range of inertia of profiles make the system to adapt to any technical constraints or requirement.
The technical solutions and options of the system reduce fabrication and installation time, while guaranteeing top performance and quality.
This façade system accepts glazing up to 49 mm. Possibility to fit in a concealed SSG italian window, concealed SSG tilt-and-turn window, in- or outward opening fire-brigade access window, and all the frame types of the Espace® 70 TH et Comète® 70 TH ranges.
In order to comply with the RT2012 standard, it is possible to increase the thermal efficiency by adding an extruded polyethylene foam spacer to achieve a minimum Uf of 0.9 W/K.m2.
The VEC bonding technique is sanctioned by an SSGS ETA in compliance with the current standards.
The initial type tests have been carried out with an italian window, thus authorizing the CE marking of the complete façade.
The thermal performance of this type of window corresponds perfectly to the overall performance of the façade, thus complying with the LBE and HPE/THPE RT2012 requirements.
+ Glazing up to 49 mm.
+ High thermal efficiency thanks to an extruded polyethylene foam spacer (min. Uf 0.9 W/K.m2).
+ Mullions and transoms have been designed to be easily reinforced with standard steel profiles.
+ Half mullions for expansion joints or adjustable angles.
+ The system is designed for skylights.
+ Various models of cover caps.
+ 90° salient angle post.
+ Harmonious integration of concealed opening window profile.
+ Segmented façades are possible.
+ Complying with RT2012 and LEB regulations.
+ CE marking of façade according to EN 13830 standard.
+ Technical validation by SSGS ETA.
+ Complying with RT2012 and LEB regulations.
+ CE marking of façade according to EN 13830 standard.
+ Bonding validated by SSGS ETA.
+ Glazing 24 mm.
+ Triple tightness barrier.
+ Adjustable hinges.
+ 3-point lock.
+ Square look.
+ Customized handle possible.
+ Glazing from 24 up to 32 mm.
+ Triple tightness barrier.
+ Thermal performance Uf : 1.9.
+ 3 sets of fittings.
+ Maximum height 2000 mm.
+ The rounded line goes unbroken from the fixed to the opening profile.
+ Customized handle possible.
+ Glazing 32 mm.
+ Triple tightness barrier with vulcanized gasket frame.
+ Concealed hinges.
+ Maximum height 2400 mm, maximum width 1500 mm.
+ 2 models of openable frames: square and bevelled.
+ Customized handles possible.
A.E.V. (Air - Water - Wind) as per EN 13830 | |||
---|---|---|---|
AE | RE 750 | V 1200 |
THERMAL | |
---|---|
Glaz. Thickn. (mm) | Uf (W/K.m²) |
24 | 3 |
26 | 1,2 |
36 | 0,9 |
SHOCK resistance | |
---|---|
Inside | Outside |
I5 | E5 |
THERMAL | |
---|---|
Glaz. Thickn. (mm) | Uf (W/K.m²) |
26 | 1.8 |
A.E.V. (Air - Water - Wind) as per EN 13830 | |||
---|---|---|---|
AE | RE 750 | V 1200 |
THERMAL | |
---|---|
Glaz. Thickn. (mm) | Uf (W/K.m²) |
26 | 1.9 |